IDECO Double Drum Back-In Well Service & Workover Rig Remanufactured to 2004

workover rigs for sale Ideco Cooper

NOTE: Pictures are for example only of Cooper unit delivered 07/22/04. This is to show an example of manufacturing quality.

We will custom build this Ideco Rig to customer specifications.

This Ideco will be a new manufactured rig with refurbished Ideco parts and titled year 2005.

This next rig is as follows!

Including:

LEBUS Grooved f/1." Tubing Line

Sand Line 15,000 feet 9/16”

Drill Line 1. Air-Operated Controls

Hydromatic Brake PARAMAC double 15 Drum, water spray Swab Drum

Drawworks 4210 Drum and Swab Drum completely refurbished to 99%of original specifications with new chains and bearing replacement as needed. ( Put brake at swab drum and cut notch in guard for controls.)

96-250 96H Telescoping Mast. 2400,000# Static Hook Load, Hydraulically Raised & Scoped with MAGNIFLUX papers

Single 3-Stage Raising Ram

5-Sheave Crown Block running on 4 lines capability

Crown Safety Platform Double Tubing Board

Triple Rod Basket

Mast Base Beam

All Mounted on IDECO 5-Axle Carrier

Re Manufactured GM 8V-92 TA Silver Late Model Detroit Diesel Engine w/Electric Starter, connected to Re Manufactured ALLISON CLT-5861 Transmission complete with Drop Box & Disconnects, 450 hp @ 1800 RPM Serial # 8VF Series Model No. 8083-7000

Heavy-Duty 12v71 Radiator Assembly with:

36" RH Fan Blade and 9” fan hub, guards
    Variable Speed Governor
    12-Volt Electric Start
    12-Volt Alternator
    Bennett Transmission air shifter (Air over Hydraulic)

Tru-Flow1000 Air Compressor (with Belt driven Governor)

New Radiator type oil cooler for transmission oil cooling (36”x36”)

Engine instrument panel complete with all gauges and starter button

Hydraulic Pump 43 gal per min

Hydraulic Utility Winch (1/2” winch line)

Air Receiver Tanks

Hydraulic Reservoir

Water Tank

Fuel Tank

Front, middle and back start and kill

Toolboxes and Bins

(2) Front and Rear Hydraulic Leveling Jacks

Deadline Anchors and guidelines will be furnished but not installed (insurance provider mandate)

Folding Walkways Stairs with kick boards

IDECO workover Rig Cooper in picture

445/65Rx22.5 Front & 10.00x20 Rear Tires
Budd Wheels

workover rig remanufactured

double drum workover rig

Comments: The Ideco is a complete restoration, including a six Month warranty on the Engine and Transmission and New Carrier with details disclosed in separate document. 80 % of replacement parts are new or 0 hr. remanufactured. Limited modifications to customer specifications are included in the price, and must be agreed upon prior to down payment. Modifications requested during manufacturing may be subject to additional charge.

SUMMARY OF TERMS
40% down with order
Balance when equipment is finished and ready for shipment.

DELIVERY
10 – 12 weeks from date of payment with order. EXWORKS