|
Model
60K HR Nitrogen Pumping Unit
Scope:
Skid mounted non-fired nitrogen pumping unit 60,000 SCFH
at 10,000 psi.
Designed for onshore or offshore operation.
Performance
Specifications:
Maximum Pressure: 10,000 psig
Maximum Flow Rate: 1,000 scfm
Minimum Flow Rate: 100 scfm (6,000scfh)
Fuel Capacity: 80 gallons
Hydraulic Reservoir: 80 gallons
Gas Discharge Temperature: 72 degrees (20 degrees above ambient)
|
Scroll down
for full detailed unit specifications |
|
Dimensions and
Weights:
Gross weight: 10,000 lbs. (8,500 lbs. w/out protective frame)
h x l x w 96" x 120" 102"
Vaporizing System:
Patented heat exchanger system
utilizing ambient air assisted heat exchanger to vaporize
liquid nitrogen and heat from engine coolant, exhaust gas, and hydraulic system.
Design
Features:
Engine:
GM Detroit diesel 150 bhp @ 2100 rpm.
Pump drive:
1 : 1 direct coupled.
Hydraulic system:
hydrostatic drive closed loop pumps w/ fixed displacement
motors.
ln2 centrifugal:
liquid nitrogen boost pump 1.5" x 2" x 4.5"
ln2 triplex:
one (1) acd gmpd
stroke:
1 3/8"
bore:
1 1/4"
control console:
stainless steel / aluminum panel console provides all gauges /
controls for ease of operation.
Boost pump pressure gauge.
GN2 discharge pressure gauge.
GN2 discharge temperature gauge.
Boost pump hydraulic pressure gauge.
Boost pump speed control.
Triplex pump tachometer-rate gauge.
Hydraulic system pressure gauge.
Coolant system temperature gauge.
Engine throttle control.
Engine start / stop / emergency.
Engine tachometer.
Engine oil pressure / temperature gauges.
Cryogenic piping:
Stainless steel low pressure piping with globe brass valves.
Stainless steel high pressure piping with valve and fittings. inlet and outlet
tank connections are cga 1 1/2" brass fittings. High pressure
N2 discharge connection is 1" 1502 Weco union.
Skid and Frame:
Base skid will be constructed of 8" x x 6" rectangular beam
main runners with channel cross members. Forklift tubes fabricated from 10"x 6" x
.250" rectangular tubing fitted into the main runners and seal welded on both sides of each tube.
Approximate spacing center to center of tubes shall be 65"
|
