National 1320 UE 2000 HP Deep Drilling Rig for Sale

One (1) Mast BRAHAM model UNIVERSAL, series 3-78-DI-M002 156' Ft.
high, Cantilever Substructure 25' Ft. high x 37' Ft, Base. Galvanized,
1,330,000 Ibs Nominal to API SID 4E/ with 12 lines. Wind load capacity 115
mph, set back capacity 800,000 Ibs & 600,000 Ibs drill pipe capacity
simultaneously, complete with racking platform.

One (1) NATIONAL 1320 UE, 1 3/8" drill line, with two (2) GENERAL
ELECTRIC, DC traction Mod. 5GE 752 1,000 HP. Each, including 20,500
ft. 9/16 sandline & ELMAGCO BAYLOR Model 7838.

A) Two (2) centrifugal pumps MISSION type 2 x 3R brake cooling system,

One (1) Rotary with independent drive NATIONAL, Model C-275, 27-y2",
One (1) GENERAL ELECTRIC, DC Model GE-752AU, 1/000 HP Motor. With
emergency mechanical independent drive.

One (1) Block, CONTINENTAL EMSCO Model RA-52-6, 52" for 1 3/8" drill
line, 500 ton capacity, BJ. HUGHES 5500 Hook.

One (1) NATIONAL Mod. 7-60-FA Crown, 500 ton with 7 • 60" - 1-3/8"
sheaves.

One (1) NATIONAL Mod. P-500, 500 ton complete.

 Two (2) NATIONAL Mod. 10 P-130, 1,300 HP, with two (2) DC, GENERAL
ELECTRIC, Mod. 752-AU, 1,000 HP. Including HYDRIL Mod. K 20, 5000
psi pulsation dampners, One (1) centrifugal supercharged pump 5" x 6". One
(1) Reset relief safety valve, COFLEXIP 3 1/2" x 15', 5,000 psi hose,
skidded with roof.

Four (4) CATERPILLAR D-399 "I A, 16 cylinders, 1,215 HP @ 1,200 r.p.m.
Each with One (1) generator GENERAL ELECTRIC: AC model 5AT, 600 volts,
60 HZ, 850 KW, 1,062 KVA, 1200 RPM, One (1) radiator R & R, One (1)
silencer MSA-1 with spark arrest, with oilfield skid & roof.

One (1) SCR, ROSS HILL, Mod. 1650 with four (4) bays, 1,800 amp. Capacity
DC, 750 volts, with AC buss, complete unit.

One (1) Motor control center, GENERAL FLECTRIC, Mod. 434 X 162003,
480 volts, three phase, 60 HZ.

Unit housed in oilfield skid wilh AC units,

One (1) compressor house with the following:

A) One (1) air compressor LEROY, mode! 770 with diesel engine 14.6 HP-
With cold start,

B) Two (2) compressor LEROY Model 990 AMP, with 30 HP electric motor.

C) One (1) LINCOLN, Model SAE-400 electric welder.

0) One (1) MANCI ICSTFR, 200-PSI Air receiver.

F) One (1) 30" diameter tank x 18 ft. long, for 150 PSI.

 30' FT (9.15 m) long x 8' ft (2.44 m) wide, 9' ft. (2.74 m) high, on oilfield
skid,

Two (2) cylindrical 10' ft. diameter x 15' 16" long, 38.3 m3 (212 bbls)
capacity, skidded 8' wide x 36' 3” long complete with valves (Total
capacity! 67.6 m3 (425 bbl):

      a) One (I) ALFA NAVAL, Separator model MAB-1038-24-60/40205-1, 1.0
hp. electric motor mod. MT80B-4.

      b) Two (2) Gear Pumps (diesel transfer) RUPPFR model 3611GHBRV with
US electric motor mod MT80B-4.

One (1) Mud Pit 49-0 m3 (308 bbls) 10' wide x 7' high x 25' 11" long,
complete with valves & connections;

A) Two (2) centrifugal Pumps MISSION, 6" X 8'/ with 75 I IP electric motors
each, explosion proof.
 

One (1) 49 m3 (308 bbls) 10' wide x 7' high x 25' 11" long complete.

A) Two (2) centrifugal pumps MISSION 3" x 4" with 30 hp electric motors
explosion proof-

One (1) Settling pit 47.5 m3 (300 bbls) 7'11" Wide x 6' High x 38' long,
One (1) mud agitator BRANDT/EPI model MA-10, with electric motor Model
LAE-205195, 10 hp. One (1) V 3000-psi top mud gun, 7' 10" wide x W
11" long oilfield skid.

 One (1) Intermediate pit 47.5 m3 (300 bbls) 7'11" wide x 6' high x 38' long.
With three (3) agitators BRANDT/EPI model MA-10, Mod LAF-205195, 10 hp
explosion proof, two (2), DEMCO type "JET" mud hoppers with valves &
connections complete, one (1) centrifugal pump Mission 6" x 8", G.L
electric motor 75 hp explosion proof/ three (3) mud guns 2" 3000 psi, 7' 10"
wide x 39'11" long oilfield skid.

One (1) suction pit cap. 47.5 m3 (300 bbls) 7'11" wide x 6' high x 38' long,
three (3) agitators BRANDT/EPI, module MA 10, Mod LAE-205195 de10 hp
explosion proof, three (3) mud guns V 3000 psi. 7' 10" wide x 39' 10"
long oilfield skid.
 

One (01) doghouse 8' 4" wide x 8' high x 15' long.

Two (02) standpipe 5-9/16", with 4" Y 3" 5M PSI manifold valves,
CAMFRON I.W, FLEX-SEAL.

      A) One (1) annular, PUCKER SHAFFF-R 16-3/4" 5,000 PS1-WP, mod 152785
(bag type) .

      B) One (1) Ram Double CAMERON type "U" ,16-3/4" 5,000 PS1-WP, rams
for 5" pipe & Blind.

      C) Q One (1) Spacer Spool CAMERON 42" long, with 16-3/4" flange, 5M WP.

D) One (1) Adapter Spool CAMFRON 1b-3/4" 5M PSI-WP (BX-162) x 16"
3M PS1-WP (R-66).

E) One (01) Double Adapter Spool CAMERON 16-3/4" 5M PSI WP (BX-162)
x10%"33MPSI-WP(R-57).

 One (0-1) set rams 16-3/4" 5M x 5"
One (01) set rams 16-3/4" 5M x blind.
Set of preventers 11" 10M PSI WP.

       A) One (01) annular CAMERON type "D" , 11" , 10,000 PSI-WP , H2S
Service-

       B) One (01) Single Ram CAMERON, type "U", 11" , 10,000 PSI-WP, H2S
Service with 5" pipe rams.

       C) One (01) Drilling Spool (control) CAMERON, 11" 10/000 PSI-WP, with
two (2) side outlets, 3-1/16" 10,000 PSI-WP, H2S Service.

       D) Four (04) Gate valves, CAMERON type "1"" 2-1/1G" 10,000 PSI.WP,
manual operator-

E) One (01) Double Ram CAMERON type "U", 11" 10,000 PSI-WP, H2S
Service, with Rams 5" & Blind.

F) Two (02) Adjustable Chokes 2-1/16" 10,000 PSI-WP.

One (01) Set Rams 11" x 5" IOM PSI
One (01) Set Rams 11" x 3-¹/'" 10M PSI
One (01) Set Rams 11" x blind 10M PSI

      A) Twelve (12) Gate Valves CAMERON type "F" 2 1/16", 10,000 PS! WP
Adjustable.

      B) Five (5) Gate Valves CAMERON type "F" 2 1/8", 5,000 PSI , WP.

      C) Two (2) Positive Chokes 2 1/16" pare 10,000 PSI, WP "H2S" service,
 

  CAMERON BOP CONTROL UNIT MODEL 0160-2-20.

a) Six (06) Accumulators, 20 gats each (120 gals total) model nscua.

b) Three (03) Hydro-pneumatic pumps model 309025-50-00, series 9, 3000 psi.

c) One (01) Triplex Pump type PQ20 Gasso, 20-hp explosion proof motor model
256t.

d) Six (06) ram-lock valves type bk-14500

c) Three (03) V*" valves hydro-pneumatic regulator pressure valves

f) Three (03) 1500-psi nitrogen cylinders, (n2) to actuate valves for open close.

 One (01) Reserve tank 234 gal (884 litre)

One (01) Remote control panel CAMERON drill floor, 19 function x 160'
long. CAMERON # 309105.Z pare 0-3000 psi.

Twenty-four (24) Drill Collars 7 V^ X 213/16" X 3T long, slick, box x pin 5

API Regular.

Thirty (30) Drill Collars, 5" X 2 V^" X 30' long. Spiral, Box x Pin 3 W 1:F:

 

All equipment listings... Drilling Rigs Drilling Components Blowout Preventers / BOP's Cement & Acid Equipment Chemicals (Drilling, Production, Refining) Coiled Tubing (Drilling and Workover) Compressors Detectors / Safety Dozers, Cranes, Front End Loaders, Road Graders Fishing Tools Gas Equipment, High Pressure Generators & Power Generation Equipment Leases, Wells, Prospects, Royalties Mud Systems & Accessories Nitrogen / Cryogenic Equipment Offshore Equipment Parts Pipe and Casing Production Motors Pulling Units / Workover Equipment Pumpjacks Pumps and Pump Skids Refinery Equipment Safety Equipment Separators The Pumper's Supply Trucks and Trailers Wireline Workover Equipment / Pulling Units   Free software