|
Offshore Jackup Class Rig
1. CLASSIFICATION AND CERTIFICATION
Note: All weights (tons, tonnes, MT, T.
etc.) are Metric Tons unless specifically specified other wise.
|
EQUIPMENT |
QTY |
DESCRIPTION |
|
1.1 GENERAL DESCRIPTION |
|
|
|
Rig Name |
|
CLASS |
|
Rig Type and Class |
|
Four leg, self elevating unit,
cantilever type, character of class 100 A5 |
|
Owned by |
|
|
|
Country of Registration |
|
Romania (Constantza) |
|
Designer |
|
Sonnat Offshore Company |
|
Yard, Builder & Date of Construction |
|
Galatz Shipyard, Romania,
keel laid 1981
completed 1982 |
|
Major modifications made
|
|
Cantilever installed, main equipment
up-graded |
|
Date & Reason for modifications |
|
01-03-99 - Increase drilling envelope,
Increase efficiency |
|
Yard modifications made |
|
Lamprell Shipyard, Sharjah, U.A.E. |
|
Date of last docking |
|
|
|
Date of next docking |
|
2010 |
|
Call Sign |
|
Y. Q. F. O. |
|
|
|
2. OPERATIONAL CONSTRAINTS |
|
|
|
2.1 Maximum water
depth - with present equipment
|
|
250 ft ( 76m ) |
|
2.2 Total leg length
NOTE: The length of legs will be
Extended to 399 ft in Shipyard.
|
|
351 ft ( 107m ) in present
399 ft (
121.619 m ) after install top leg section |
|
2.3 Leg spacing |
|
Center to center
-Longitudinal 126 ft ( 38.40 m )
-Transversal 109 ft ( 33.22 m )
Between spud cans (auxiliary tanks)
-Longitudinal 87.25 ft ( 26.54 m )
-Transversal 70.27 ft ( 21.42 m ) |
|
2.4 Maximum length of leg usable below
Hull
|
|
272 ft ( 83 m ) below hull
See note above
, the new length usable below hull will be 352.75 ft ( 107.52 m ) |
|
2.5 Maximum variable load:
- Moving
- Jacking
- Drilling
|
|
Limited by the load line draft of the
unit and in accordance with the leg length and choice of
footing ex:
-4,850 kips, or 2,200 psi jacking
pressure.
-4,300 kips, 1,950 metric tons normal
operations
-3,940 kips, 1,790 metric tons, storm
conditions. |
|
2.6 Maximum combined drill floor load:
- At minimum overhang drilling
position
-center line
-At
maximum overhang drilling position-
-center line
-At
maximum overhang drilling position-
-full port or starboard
|
|
530 metric tons
460 metric tons
161 metric tons
|
|
2.7 Pre-load condition:
-Maximum pre-load capacity total (Cubic meters)
-Maximum pre-load capacity total (Metric tones)
-Pre-loading time |
|
Preload tanks cap. 1510 m3 (Tk No.2 cooling water not included)
3274 mt/leg
2 hours (depend of ground) plus 1,5h
each diagonal check in press (ballast time not included,
estimated 4 - 5 hours ) |
|
2.8 Cantilever:
- Drilling envelope dimensions
|
|
45 ft x 20 ft without extensions
55 ft x 20 ft with extensions |
|
2.9 Maximum cantilever load:
- At minimum overhang drilling
position
-center line
-At
maximum overhang drilling position
-center line
-At maximum overhang and full starboard or port position
|
|
Cantilever load chart attached |
|
2.10
Maximum set back load for skidding between slots:
- From minimum overhang drilling
position
-center line
-From
maximum overhang drilling position-
-center line
-At maximum overhang and full starboard or port position
-Can cantilever be locked in any
position in skid pattern |
|
210 mt for all three situations.
Rotary table center can be locked in
any point of the drilling envelope by hydraulic jacking
system.
|
|
2.11 Maximum Drilling Conditions:
Wind
Wave/Period
- Current
|
|
With maximum hook load, both DP stands
full - 50 knots. No hook load, both DP stands full 70
knots. No hook load, no setback, 100 knots.
12 m (394)/10 sec.
4 knots |
|
2. 12 Maximum Operating:
- Temperature ( air )
- Humidity
- Temperature ( water )
|
|
Minimum -20o Celsius.
Maximum according to HSE guidelines of clients |
|
2.13 Survival conditions in 225 ft of
water:
- Wind
- Wave/Period
- Current
|
|
Same as 2.12 above with the following
guidelines for full storm conditions Eliminate hook load,
Laydown all pipe (no setback), empty ballast tanks, re level
MODU if needed, redistribute variable loads to achieve equal
leg reaction, assure that jack cylinders and jack pines are
shimmed properly, turn off electrical power to jacking
system, check anchor bolts, derrick-to-substructure and
cantilever clamp bolts, protect equipment from wind driven
rain, secure all deck equipment, cranes, and pipe, turn on
fog horn and obstruction lights, secure all water tight
doors and hatches, reduce rotary load to 100MT. |
|
2.14 Towing:
- Displacement
- Light weight draft
- Maximum draft with full moving load
|
|
Light weight - 9710 T plus maximum
variable load for moving measured draft when inclined (Mean)
From 4.64 m to 4.80 m [ legs ( 399' )
pos I ]
From 5.206 m to 5.4 m |
|
2.15 Minimum horse power and/or bollard pull requirement for:
- Ocean tow
- Field tow
|
|
10,000HP minimum 70tf on bollard
7,000HP minimum 70tf on bollard |
|
2.16 Number of vessels required for towing and positioning:
- Towing
- Positioning |
|
1 to 3 nos
3 nos |
|
|
|
3.
MAJOR DIMENSIONS |
|
|
|
3.1 Hull shape |
|
rectangular |
|
3.2 Length and
overall width
|
|
52.46 m x 40.84 m (
172 x 134 ft ) width including stern spoonsons 49.38 m
( 162 ft ) |
|
3.3
Hull depth
|
|
6.825 m ( 22 ft ) in
center line of the hull
6.826 m ( 21 ft ) on
sides of hull
|
|
3.4. Height of drill floor above
cantilever deck ( pipe rack ) |
|
4.830 m ( 15.85 ft )
|
|
3.5 Height of drill floor above main
deck |
|
10.860 m ( 35.63 ft )
|
|
3.6. Height of drill floor above drive
pipe support/Texas deck
|
|
16.76 m ( 55 ft ) |
|
3.7 Height of drill floor above bottom
of hull
|
|
17.165 m ( 56.3 ft ) |
|
3.8 Distance between bottom of cantilever skid beam and bottom
of hull
|
|
7.32 m ( 24 ft ) |
|
|
|
4. JACKING AND MOORING SYSTEM |
|
|
|
4.1 - Jacking Speed
( up )
- Jacking Speed ( down )
- Type of control
- Control location
- Safety systems and alarms
|
|
1.5 ft/min
1.0 ft/min
System electro-hydraulic with Inter-blocking; mode of operating with barge: semiautomatic
Helideck level
Relief valves, level indicator tank,
pressure switch and thermo switch, control flow, alarms. |
|
4.2 Anchor
type/weight
|
2 nos |
HULL 4.5 T FWD |
|
4.3 Anchor line and
length
|
300m |
32 x (6 x 37) - 180/B - S/Z |
|
4.4 Minimum anchor line breaking strength |
|
70 t
|
|
4.5
Windlasses type
|
2 nos |
2 x 20 tf type B each electric drive |
|
4.6 Speed and load rating
|
|
Turning average nominal speed of the
cable at drum 4m/min |
|
4.7
Mooring lines ( size, type and length )
|
2 nos |
Cable 20 mm ( 6X24 ) -160B-S/Z-length
120 m |
|
4.8
Mooring accessories ( shackles, hooks, tension control, etc.)
|
|
Complete |
|
4.9
Towing Bridle
|
2 nos
1 nos |
Cable 64 mm ( 6 x 37) - 160B - S/Z
length 28 m ( 110 tf 5 min test )
Emergency towing
|
|
4.10 Recovery bridle and line
|
2 nos |
Cable 20mm ( 6x24 )
- 160B - S/Z length 90 m |
|
|
|
5. STORAGE CAPACITY |
|
|
|
5.1 Operating deck
load available for Company tubulars, containers and
baskets assuming:
- all mud pits full of 1.2 s.g. mud
-all silos
full
- 60% of rig capacity for fuel onboard
-60% of rig
capacity for fresh water onboard
- combined
cantilever load at maximum
overhang (both sides)
|
|
367.62 T ( Ref. 1467 mt allowable plus
Hook load )
Note: water in Tk No.2 ( 200 mt
estimated, not included )
354.64 m3 x 1.2 mt/m3
131 m3 x
1.918 mt/m3
131 m3 x
1.298 mt/m3
131 T
121.38 T
249.5 T |
|
5.2 Maximum loading
per square meter for:
- Main deck casing racking beams
- Main deck free space
-
Cantilever deck casing racking beams
- Test
Equipment Deck |
|
2.92 mt /sqm
2.92 mt / sqm
1.25 mt / sqm
yes
|
|
5.3 Available deck
spaces:
- Main deck casing racking beams
( m2 )
- Main deck free space ( m2
)
- Cantilever deck casing racking
beams ( m2 )
- Test Deck ( m2 ) |
|
See Drawing List pct. 7 |
|
5.4 Sack material
storage available to COMPANY
- number of sacks |
|
1000 sacks covered area
|
|
5.5 Bulk Mud
Material:
- Barite
- Bentonite
- Total |
|
3465 cu.ft
1155 cu.ft |
|
5.6. Liquid Mud:
- Active capacity
- Reserve capacity
- Total
- Slug Pit
- Surface/sand Trap
Volume |
|
510 bbls
1470 bbls
1980 bbls
150 bbls
180 bbls ( trip tank included ) |
|
5.7 Bulk cement:
- Permanent
- Piping to allow use of bulk mud
material silos for cement |
|
4,600 cu.ft
yes
|
|
5.8
Drill water:
- capacity
- tanks |
|
3,482 bbls
3
|
|
5.9 Fuel oil capacity |
|
1595 bbls |
|
|
|
|
|
6. COMMUNICATIONS EQUIPMENT |
|
|
|
|
|
|
|
6.1 Main single side
band (SSB) radio telephone
- Manufacturer and type
- Output |
|
SKANTI COBRIDGE 8000 DANEMARK
400 W
|
|
6.2 Reserve SSB (Receive only)
- Manufacturer and type
- Output |
|
TX / RX
FURUNO FS 1562 and DSC 6
150 W
|
|
6.3 VHF-FM radio telephone
- Number
- Manufacturer and type
- Output |
2 nos |
SKANTI; VHF 3000 with DSC 3000
SPERRY; RT 2048 with DSC
RM 2042
25 W |
|
6.4 VHF-AM helicopter transceiver
- Manufacturer and type
- Frequency 129.2 mandatory |
|
SL 11 - R 220
ALL AIR BAND
|
|
6.5 PA System to be audible in all
parts of the installation
- Type
- Manufacturer |
|
PHILIPS HOLLAND |
|
6.6 Portable UHF Hand Sets
- Spare battery
- Battery charger
- Manufacturer
- Type
- Number |
8 |
yes
yes
MOTOROLA, U.S.A.
|
|
6.7 Aeronautical portable VHF complete
with head set, mouth piece and attached remote activating switch
- Spare battery
- Battery charger
- Unit to
be turned to frequency 129.20 MHz |
|
TR 9102
JOTRON - NORWAY
yes
yes
|
|
6.8
Interconnected rig telephone system where all stations can be contacted
from any station to include, but not limited to:
All On Board Offices, Radio Room,
Drill
Floor, BOP Area, Pit Room, Shaker
Room,
Cementing Unit, Mud Logging Unit,
Wire Line Logging Unit, MWD/LWD Unit,
Main Deck, Cantilever Deck, Mess
Room, Coffee Shop and Recreation Room
|
|
Type ; MITEL UK
64 ext
P.A. Interfaced |
|
6.9 Radio system for life boats
- Manufacturer and type
|
4 |
NAVICO (U.K.)
SRH 250 |
|
6.10 Facsimile equipment
|
|
|
|
10.11 Photocopier |
|
YES |
|
|
|
7. NAVIGATIONAL, METEOROLOGICAL AND
OCEANOGRAPHIC EQUIPMENT |
|
|
|
7.1 Helicopter beacon
|
|
SA 100 D - U.S.A.
HELI-PAD ANTENA |
|
7.2 Fog horns to international
standards |
|
YES |
|
7.3 Wind and direction indicator |
|
YES |
|
7.4 Meteorological thermometer |
|
YES |
|
7.5 Air humidity sensor |
|
Yes |
|
7.6 Meteorological barometer |
|
Yes |
|
7.7 Navigational lighting to
international standards |
|
Yes |
|
|
|
8. HELICOPTER FACILITIES |
|
|
|
Heli deck dimensions and markings
|
|
Marking diameter 11 m ( 36.08 ft )
Helideck dimensions 24.4 x 24.4 m ( 80 x 80 ft )
|
|
8.2 Maximum load capacity and maximum
helicopter size/type
|
|
T ( 16 310 Lbs )
PUMA SA 330 B |
|
8.3
Heli deck lighting |
|
Yes |
|
8.4 Wind sock with
illumination |
|
Yes |
|
8.5 Safety net |
|
Yes |
|
|
|
|
|
9. MATERIAL HANDLING EQUIPMENT |
|
|
|
All cranes are equipped with hook load
and boom angle indicator and automatic overload warning
device.
Crane are also equipped with automatic
maximum high boom angle warning device and non-bypass stop device.
|
|
Crane 1& 2
- Type / Model / Year
-Manufacturer
- Boom Length
- Typical lift capacity at specified
radius
(a) main hoist
(b) whip line
- Location/Column height |
|
Main 21.3 m, whip 24 m
@6m rad-32 t SWL
@6m rad-5t SWL
Stb & Port side / 5987 mm
above main deck
|
|
9.2 Crane 3
- Type / Model
- Manufacturer
- Boom Length
- Typical lift capacity at specified
radius
(c) main hoist
(d) whip line
- Location/Column height
|
|
ped. Mount , Diesel powered, Link-Belt,THC-80
LBS S.P.A., Milano,
Italy
@7.5 m- 18.5 t SWL
@8.0 m- 3.5 t SWL
Leg no. 4 / 2500 mm
above support in extension on leg house
no 4 |
|
|
|
10. POWER EQUIPMENT |
|
|
|
Diesel Engines
- Number
- Manufacturer
- Type
- Output (HP)
- Fuel consumption per unit under
maximum load
- Usual total daily fuel consumption
- Type of fuel(s) suitable
|
|
- I.C.M. Resita 6LDSR 28H, AC, 1150
HP (2 nos); 3.52 t/day (75%)
- I.C.M. Resita 12LDSR 28F, DC, 2500
HP (3nos); 7.65t/day (75%)
- Volvo Penta TAMD 163A, 370 KW (1 nos);
1.35 t/day (75%)
- Volva Penta TMD 120AK 185 HP (1 nos);
0.625 t/day (75%)
- Detroit 1100 HP (1nos)
Diesel oil
|
|
Main Generators
- Numbers
- Manufacturer
- Type
- Rated KVA
- Max. Amps (continuous duty) |
AC
2 |
UCM Resita
GS 1200 800 8
1000
1540
|
|
Main Generators
- Numbers
- Manufacturer
- Type
- Rated KW
- Max. Amps (continuous
duty) |
DC
3 |
ELECTROPUTERE CRAIOVA
GFI 1100/10 TH III
1500
2400
|
|
10.4 Auxiliary Generator
- Numbers
- Manufacturer
- Type
- Rated KVA
- Max. Amps (continuous duty) |
AC
1 |
| |
