Chicago Pneumatic Tandem Compressors

Four belt driven (1-4) compressor units plus parts. Three are field ready with # 3 unit needs work or can be used for parts. All compressor units have running 333 Caterpillar gas engines with Fairbanks Morris electric module models. Unit #4 has a 333 Caterpillar gas engine with 0 running hours. All units are well maintained.   

#4) 4 3/4" X 4 1/4" X 11" TG stroke Serial number 89168

Hydraulics 2,250 psi at 300’ Bored 5 1/2"

Working pressure 1,500 ~si

Maximum temperature 500 Fahrenheit C.E. 8.8" H.E. 7.7" 

#2) 3 1/2" X 4 1/2" X 9" TG stroke

Serial number 76714 Hydraulics 1,800 pounds Bored 4 1/2"

Working pressure 1,500 psi Maximum temperature 300 ° Fahrenheit, Maximum working temperature 300. Fahrenheit M/n/mum RPM 85 Maximum RPM 360 

#1) 4 3/4' X 5 1/2" X 11" TG stroke

Serial number 87489 Hydraulics 2,250 psi at 300° Bored 5 1/4"

Working pressure 1,500 psi Maximum working temperature 500° Fahrenheit c.g. 9.96"

H.E. 8.51" 

#3) 4 3/4" X 5 1/2. x 1! TG stroke Serial number 89222

Hydraulics 2,250 pounds at 300° Bored 4 3/4

Working pressure 1,500 psi at 300° Maximum temperature 500u Fahrenheit C.E. 12.1',

H.E. 9.9"

More detail upon request! All four compressors look the same. They came from a lease that was plugged. This is a great deal on well maintained equipment that saves 100's of thousands of dollars over new equipment and all parts are affordable and available virtually anywhere.

Two big pictures load slowly, so just give it a minute.