BOP 6011i for sale

6011i Ram Bop

The T3 Model 6011i Ram BOP is available in 7 1/16”, 9” (same body as 11”), 11” and 13 5/8” bore sizes and was designed to meet the market need for a more economically priced 2,000 PSI, 3,000PSI and 5,000 PSI working pressure ram BOP’s. The T3 Model 6011i is priced to compete with remanufactured equipment of the same bore size and pressure rating.

The T3 Model 6011i Ram BOP has the same well pressure control performance as the Cameron®/CIW “U” ram BOP. It can be equipped with large bore shear bonnets when pipe shearing is required. The T3 Model 6011i accepts the Cameron®/CIW “U” profile ram blocks. This assures product support worldwide from ram rental companies and also gives customers expanded options for ram block and ram packer product support. The T3 Model 6011i can be fitted with fixed bore pipe rams, variable bore rams and shear sealing rams.

The T3 Model 6011i ram BOP has unique internal porting that reduces overall weight yet still allows for hydraulic opening and clos- ing of the bonnet assemblies for ram change out. T3 Energy Services offers the Model 6011i ram BOP with studded end connections stan- dard, but can add flanges or hubs to meet specific requirements. The T3 Model 6011i ram BOP meets API 16A requirements and H2S sour service per NACE MR0175.

FEATURES

• Available in 7 1/16”, 9”, 11” and 13 5/8” bores

• 2,000 PSI, 3,000 PSI and 5,000 PSI working pressures

• Priced competitively with remanufactured BOP’s

• Design supports single or multiple ram bore configurations

• Identical wellbore control performance as the

Cameron®/CIW “U” ram BOP

• Accepts Cameron®/CIW “U” ram blocks

• Easy ram change out

• Lower operating cost

• Wellbore pressure containing components from forged steel

T3-Oilco, 44 Gallon, 4 Station, BOP Control System, with ( 1 ) Pneumatic Remote Panel. Manufactured to T3-Oilco API-Q1, ISO 9001 and as per customer request and includes the following equipment:

· 1 each - 132 US Gallon, steel fluid reservoir, complete with baffles, ( 4 ) 4" inspection ports, sight glass, 2" FNPT vent and mounted on a structural steel roll skid assembly. Note: Tank Dimensions: 14" width x 60" length x 36" height. Skid Dimensions: 6' width x 9' length x 7' height.

· 4 each – ( 11 ) gallon, 3,000 PSI WP, 1 1/4" ported separator ( Bladder Type ) TOP load accumulators. The accumulator shell is manufactured from a single-piece of chrome moly steel and is free from joints, seams or welds. The top load design permits field repair without voiding the certification. The vessel meets USCG, API and ASME Section VIII, Division-I.

· 1 each – 4 1/2” O.D. XXH Accumulator manifold. This is manufactures with 100% penetration welds for working pressure to 4500 psi. The manifold is equipped with a main isolation valve and a bleed-off valve and is mounted on the back-side of the main skid assembly. The Accumulators are Nitrogen pre-charged to 1000 PSI. + / - 10%.

· 1 each - Positive displacement reciprocating Cat 550 Tri-Plex Plunger Pump ( 5 GPM @ 3,000 PSI) with 1" Suction Line, shut-off valve, Y-strainer, and 1" x 5,000 PSI discharge check valve with ( 1 ) pulsation dampner, ( 1 ) 3500 PSI. Relief Valve and Sch. #80 piping and fittings.

· 1 each - Power Belt and sheave drive / guard assembly.

· 1 each - 10 H.P. motor, 480 Volt, 60 HZ, 3 – phase, 1750 rpm. General service

· 1 each - Electric Pressure switch. ( Adjustable High / Low Settings ).

· 1 each - Allen Bradley Starter Box Assembly, Size-2, Manual - Off - Auto positions, with spring return in the manual operation.

· 1 each - 1/2" I.D. ( 3 ) station, hydraulic manifold

· 1 each - 1/2” Sch. #80 Annular Manifold.

· 4 each - 1/2” ( 4 ) Way, stainless steel fitted, Rotary Shear Seal “SELECTOR” Hydraulic Valves, for all open / close functions.

· 1 each - Blind /Shear Ram Valve Guard Cover, No Lock-out

· 1 each - 3/8” FULL-FLOW, Manual Manifold Regulator, stainless steel fitted, ( 1 ) 1/2" NPT inlet port, ( 1 ) 1/2" outlet port.

· 1 each - 3/8” FULL-FLOW, Annular Regulator, manually controlled, stainless steel fitted, ( 1 ) 1/2" NPT inlet port, ( 1 ) 1/2" outlet ports.

· 4 each - Air actuators with mounting brackets and all necessary stainless steel fittings, quick exhaust and plumbing. This allows remote operation of all Control valves from the Pneumatic Panel.

· 1 each - Pneumatic / Hydraulic Inter-connect Junction Panel with all stainless steel fittings and tubing for the connection of ( 1 ) hose bundle assembly to the Pneumatic remote control panel. The main air supply is feed from the main unit to the Remote panel.

· 1 each - 100’ Pneumatic / Hydraulic inter-connect hose bundle assembly.

· 4 each - 4” liquid filled, panel mount gauges, installed in a protective panel. ( Accumulator, Manifold, Annular and Rig Air. )

· 2 each – 1/2” X 10,000 PSI. Bleed-Off Valve.

· 1 each – Charging and Gauging assembly kit with top load extension.

· All piping and fittings are Schedule #80 components.

( 1 ) Pneumatic Remote Panel

· 1 each – 1/4" Pneumatic Master Control ( Hold to Operate ) Valve.

· 4 each – 1/4" Pneumatic Manipulator Valves for all Open / Close functions, tagged as per customer request.

· 4 each - 2" System pressure indicator gauges, consisting of Accumulator, Manifold, Annular and Rig Air pressure.

· 1 each - 1/2” Filter, Regulator, Gauge, Lubricator Assembly.

· 1 each - #12 Pneumatic Inter-connect Junction Panel.

· 1 each – Protective Cabinet with BOP stack graphics, name plates and lifting lug. Sized as per customer request.